• Av. Joaquim Barnola i Bassols, 6
    08760 MARTORELL Barcelona

SELF-ADHESIVE ELASTOMERIC INSULATING FOAM

Elastomeric self-adhesive foam for the insulation of metal ducts. Available in different thicknesses of 6 mm, 9 mm, 19 mm and 32 mm. Also available with aluminum coating.

SOME TECHNICAL DATA:

Density per section 40-60 Kg / m³.

Thermal conductivity of 0 ºC λ <0.034 W / M.K. Reaction to fire TS EN 13501-1, B_ s3- d0.

Maximum temperature of +110 oC and minimum of -40 oC.

Resisteance to diffusion of water steam μ ≥ 10,000

REINFORCEMENT BRACES

Interior brace reinforcement for rectangular duct.

In large ducts it is used as internal reinforcement to ensure its rigidity.

STAMPED ACCESSORIES FOR CIRCULAR DUCT

We have recently incorporated a complete range of stamped accessories for circular ducts that, for quality, price and availability, offer the best supply option that currently exists in the Spanish market.

Manufactured in the EU with an exceptional quality level.

We have the 2 options: with and without rubber.

RUBBER JOINT

Rubber joint for circular duct accessories.

It converts one standard accessory into one with rubber at the moment. You will save the duplication of stocks.

Ultra-fast assembly, no need for any additional fixing elements.

Supplied in rolls of 100 ml M-1, black color.

It has a double rubber lip to ensure an optimum level of airtightness: Class C. It seals automatically around the perimeter, even in cases of proximity of the tube, for example, to a corner.

Two versions: with and without interior adhesive.

Patented model.

BASES AND ACCESSORIES FOR STRUCTURES

Elements to form ideal support structures for roofs with machinery and pipes, with other usages such as stairs, etc.

Safe and stable supports, waterproof, non-slip and with good anti-vibration behavior. Easy to install without the need of prior training, it guarantees perfect leveling thanks to the adjustable feet.

ACRYLIC AND REFRACTORY PUTTY

Special putties for sealing ducts.

Acrylic and Refractory with properties to withstand high temperatures.

GALVANIZED IN COLD SPRAY PAINT

Zinc Paint in Spray.

Shiny finish.

Fast dry.

Can of 400 ml.

IMG_4213

BEAM CLAMP

With different sizes for different weights.

Materials: galvanized cast steel and stainless steel.

DUCT SUSPENSION CLAMPS

Clamps for the support of circular ducts.

Normal and isophonic (striated rubber band).

Diameters from 80 mm to 1250 mm with welded hose with double thread pitch.

The lugs of each semicircle are for M-8 screws and incorporate the rapid fixing system.

RUBBER AND SPRING ANTI-VIBRATORS

Two types: compression and tension.

For machinery suspension applications in general.

ANTI-VIBRATION SUPPORTS

Anti-vibration supports with a rubber pad and washer.

Made of galvanized steel of 2 mm thickness.

Types: T – L – Z – U – V – W

Applicable for rectangular duct (upper and lower part) and for circular duct.

SELF-ADHESIVE NAILS

Self-adhesive nails, for insulation securing.

Ideal for placement on site

ANTIVIBRATORY FLEXIBLE DUCT CONNECTORS

PVC: for standard installations up to 80ºC. Polyurethane: for special installations up to 400ºC.

Antistatic flexible duct connectors.

Standard executions of measures 45 – 60 – 45 mm.

Connectors of special measures: narrow and wide.

Used to profile the integral joints of 20 and 30 mm.

PATCHES FOR FLEXIBLE DUCT CONNECTORS OVERLAP

PVC fabric + Fiber.

Self-adhesive on one side with protective paper.

2 measures: 50 × 60 mm. and 50 × 100 mm.

Also available on request in rolls of 50 mm. wide and 50 m long with double-sided adhesive.

PERFORATED TAPE

With round holes (and optionally oval).

Various thicknesses: 0.60 – 0.90 mm.

Presentation in rolls of 10 and 25 mts.

LOWER SUPPORTS

Supports for rectangular ducts.

Without anti-vibratory rubber.

For the lower part of the duct.

UPPER SUPPORTS

Supports for rectangular ducts.

Without anti-vibratory rubber.

For the upper part of the duct

PROFILES FOR SUPPORT

3 Sizes: 20 × 10 × 1, 40 × 20 × 1,5, 40 × 40 × 1,5.

Special threaded nuts M-6 and M-8 for its internal sliding.

WALL SUPPORTS

2 Lengths: 450 mm. and 600 mm.

For profiles 41 × 41 × 1,5

NAILS WELDING MACHINE

Machines for welding nails by discharge of condenser, for securing the interior and exterior insulation.

Easy and fast use. With magnetic head.

Valid for all nail length measurements.

AIRTIGHTENESS TEST MACHINE

Machines for airtightness testing in ducts.

Lindab Leakage Tester LT600

Up to 7,000 Pa. Of positive or negative pressure.

Automatic rapport printing.

Simple, fast and effective.

DAMPER REGULATION CONTROLS

Dampers controls for regulation gates

(several models for all sizes).

SUPPORT BOLTS

Support bolts of M-8 and M-10.

For the support of rectangular ducts from the same connecting screw between sections.

SCREWS

Self-drilling screws, studs, washers, connection hoses, screws and nuts, threaded rods of 1, 2 and 3 meters; etc.

GASKETS

Sealing for duct tightness:

Polyethylene, Closed Cell, M-1 (self-extinguishing), Self-adhesive for installations with a temperature lower than 80ºC. Various measures

Ceramic Gasket, M-0 (flame retardant), Self-adhesive for installations with temperature up to 1,000ºC

FLANGE CLAMP FOR RECTANGULAR DUCT

Two Types: Bolt and Sliding.

Bolt:

They are for universal use (ECO and APPROVED)

Sliding:

Exclusive use for the RAMI-SYSTEM® unions

RUBBER STUDS

Rubber studs with their corresponding washer.

For various applications

RIVETS FOR DEFLECTORS

For quick fixation of turning vanes at the curves of the ducts.

It remarkably simplifies the assembly of turning vanes, being fixed quickly and securely in one operation.

IRIS DAMPER

In order to control air volume and measure pressure.

For standard diameters from 80 mm. up to 800 mm.

SUPLY AIR VALVES

Two options: Plastic and Stainless steel.

EXHAUST AIR VALVES

Automatic operation by flow control.

CIRCULAR STRAIGHT SLEEVES

Composed in a single piece of cloth (without overlap) and 2 adjustable AISI 430 stainless steel clamps.

They are manufactured in standard quality, high temperature and antistatic.

STEEL WIRE SUSPENSION KIT

It includes the fast adjustable suspension unit and a 2 mm steel wire.

INSULATION PANEL FIXING SPRING

Ideal for fixing the overlap of the insulation panels on the outside of the rectangular metal ducts.

STAINLESS STEEL FASTENING BAND & LOCKING DEVICE

Supplied in bags of one roll of fastening band (30 meters) and 10 locking devices.

HAND-OPERATED TOOLS FOR METAL SHEET

«MALCO» (U.S.A.) hand tools for the metal sheet work.

  • Scissors for cutting insulation foam.
  • Pliers for opening drills on metal sheets.
  • Aviation snips for cutting sheet metal.
  • Crimper to make tube notches.
  • Pincers for tightening and cutting nylon flanges

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

This website uses cookies for you to have the best user experience. If you continue browsing you are giving your consent for the acceptance of the aforementioned cookies and the acceptance of our cookies policy , click on the link for more information. ACEPTAR

Aviso de cookies